Black Refueling Fuel Dispensing Hose installed with NPT Swivel and
Reinforcement: Single High-strength wire braided.
Temperature: -40℃ to +100℃
Color: Black, Yellow, Red, Blue, Green or according to your needs.
Application: For fuel dispensing pump applications, including gasoline, diesel,
oxygenated fuels (up to a maximum of 15% oxygenated compounds),
lubricating oil, and other mineral oil etc.
Standard length: 20m, 50m (Random Length)
Superiority: Very Good Flexibility, will not get hard easily even after using
for a long; Strong ageing resistance; Not easy to creak even under
high environment temperature; Good gasoline resistance; Excellent
anti-static electricity; Safe; At the same quality level as Good
Quality warranty: The Quality warranty for our Hose is 12months.
But in real application, if you use it under correct conditions,
there's no problem to use for 24months.
|Item code||Inner Diameter||Outer Diameter||Working Pressure||Burst Pressure||Length||Measurement||Weight|
Rubber Content of "Paishun's Hose" - The NBR Content of Hose Inner
Tube is 42% and 40% in Hose Outer Tube.
The High NBR Material Content makes the Hose has excellent
"permeability", so the Hose is able to not " bulge" even being
immersed in High grade gasoline after 72 hours.
The Electrical Conductivity of Hose Assembly - When our workers do
the assembling, we'll make sure that the Connectors to be well
connected to Hose Wire, to make sure the Hose has "stable
conducting electrostatic property", we test the " Hose Electrical
Conductivity" with Ammeter.
Pressure Test - Every batch Hose will be tested under the Test
Pressure (10times higher than the Hose's W.P.) and keeps at least 3
minutes, this is to avoid any invisible holes appear on Hose.
The Wire we use - The tensile strength of Single Wire we use is
2750 Newton high strength wire, the wire diameter is 0.295mm.
PASSION® Branded Hoses:
We - Paishun, produce fuel dispensing hose for various fuels
including diesel, gas oil, kerosene, petrol, oil and lubricants. As
a leading manufacturer of Rubber Hose we understand the importance
of high quality, durable hose that can be used in a wide range of
operating conditions. We offer hose in differing lengths, and also
pre assembled hose kits including hose end fittings, for easy
installation. All hose in our range is constructed from the highest
quality materials available, using advanced manufacturing
techniques to ensure excellent durability.
The PASSION ® branded hose is constructed of
single-wire braid to provide static conductivity and
increase hose strength.
The couplings are zinc diecast with aluminum ferrules; also
available with internally expanded chrome plated brass fittings.
The hose assemblies are compatible with up to E15
ethanol blend gasoline and B20 biodiesel blends.
Custom hose lengths are available.